Company name: Composite Technologies, Inc

Contact name: Roger Steinfeldt

Phone: 608-539-5151

Fax: 608-539-5150

Equipment: Twin Screw Extruders

Make: Werner & Pfleiderer

Year: Unknown ?

Size: 53mm-120mm

Vented: yes

Price: Inquire

Extra information: CTI has the following Werner & Pfleiderer twin-screw extruders available for sale a ZSK-40, ZSK 53mm, Two (2) ZSK 57mm, ZSK 58mm, ZSK 92mm, ZSK 120mm. Some are used, but in good condition, some will need to be rebuilt, to your specifications, and others are rebuilt and ready to go. We own what we sell and you can inspect any of our machines in our warehouse. Let CTI custom build a W&P extruder for your process, for less! Don't forget that we manufacture OEM replacement parts (screw shafts, barrel sections, and screw elements) for over 14 different twin-screw extruder manufacturers in various sizes, not counting clones! We have the parts in stock, so you don't have to! Contact us for a quote. 4/09

Company Name: AET (Advanced Extruder Technologies)
 

Contact Name: Fred Jalili

Phone: 847-238-9651

Fax: 847-238-9654

email address:  sales@aetextruder.com


Equipment: Single Screw Dual Diameter Reclaim Extrusion Syatem  (see picture & specification, click here)

Make: AET

Year: NEW

Size: 6" x 10" inch

L/D: 32:1

HP: 400 HP AC

Water Cooled: Yes

Vented: Yes

Center Line Height: 50"

Price: $350,000.00 or Best Offer (List Price $539,951.00)

Other important information: NEW (NEVER USED) AET Reclaim System including 6" x 10" Dual Diameter Extruder, Xaloy HSC-80, 8" Hydraulic Slide Plate Screen Changer and Xaloy WRP35S Water Ring Pelletizer, 480 volt with 110 volt control circuit. 1/10
 

Company Name: Nuovafil Infoteck Pvt Ltd
 

Contact Name: Garvit Sahai

Phone: 011 91 984 3134420

email address:  info@nuovafil.com

Equipment: Single screw extruder with filament line

Make: Extrusion System Ltd. UK

Year: 1997

Size: 75mm

L/D: 28:1

HP: 40 HP

Air Cooled: Yes

Vented: No

Center Line Height: Standard

Price: $280,000.00

Other important information:  Nylon filament line 0.10 mm to 2.00mm diameter at a extruder rate of 35 to 80kg/hr including Die, gear pump (50cc) with pressure gauge, control panel (independent type switch board) (box), auto thermo control (5 points), chiller 10 HP for water, take-off unit "A" (7.5 HP, 10 to 40 m/min take-off speed, take-off speed roller 270*450L*7, pressure roller 1 piece), stretching device (hot water trough with a heater capacity of 18kW), take-off unit "B" (10 HP, 10 to 40 m/min take-off speed, take-off speed roller 270*450L*7, pressure roller 1 piece), secondary stretching device (double circulation hot air oven (length 450*4000) air blower 2 HP (2), and a heater capacity of 18kW), take-off unit "C" (15 HP, 40 to 160 m/min take-off speed, take-off speed roller 270*450L*7, pressure roller 1 piece), annealing device (double circulation hot air oven (length 600*3000 i set) air blower 2 HP (1), heater capacity of 18kW and auto thermo controller,1 set) take-off unit "D" (7.5 HP, 40 to 160 m/min take-off speed, take-off speed roller 270*450L*7, pressure roller 1 piece), winding machine type 80*1 (number of spindles 80, winding motor 1.2kg/cm*128, DIN upto DIN 800, dimensions L*W*H 28*2.5*2.5) shipping data 125 cubic meter. 4/11
 

Company Name: Bouldin Corporation
 

Contact Name: Keith Bouldin

Phone: 931-668-4090 EX: 105

Fax: 931-688-3209

email address:  kbouldin@bouldinlawson.com

Equipment: Single screw extruder

 (see picture #1, click here)

 (see picture #2, click here)

Make: Prodex Model 800B-24

Year: 1991

Size: 8 inch

L/D: 24:1

HP: 300 HP

Air Cooled: Yes

Vented: No

Center Line Height: Standard

Price: $36,000.00

Other important information:  Serial number 1182, FOB: Morrison, Tennessee, Loading & shipping by buyer. 7/11
 

Company Name: Bouldin Corporation
 

Contact Name: Keith Bouldin

Phone: 931-668-4090 EX: 105

Fax: 931-688-3209

email address:  kbouldin@bouldinlawson.com

Equipment: Single screw extruder

 (see picture #1, click here)

 (see picture #2, click here)

Make: NRM Pacemaker 70

Year: 1964

Size: 6 inch

L/D: 20:1

HP: 125 HP (Tuckunder)

Air Cooled: Yes

Vented: No

Center Line Height: Standard

Price: $19,000.00

Other important information:  Serial number 10683, Order number AJ40135, Loading & shipping by buyer, 460 volt, 3 ph. 7/11
 

Company Name: Polymer Depot LLC
 

Contact Name: Kevin Wanecke

Phone: 262-646-4027

email address:  kwanecke@earthlink.net

Equipment: Single screw extruder & "Gala" 8.1 Pelletizer

(see vedeo, click on link) http://www.youtube.com/watch?v=Qi3IIQjUS9s

Make: NRM (Two (2) units for sale)

Year: 1971

Size: 6 inch

L/D: 36:1

HP: 300

Vented: Yes

Water Cooled: Yes

Center Line Height: Standard

Price: $115,000.00

Other important information: Including: A two stage feed screw, 6" hydraulic screen changer & "Gala" 8.1 Pelletizing unit. 10/11
 

Company Name: Deadwood Biofuels
 

Contact Name: Randy Kramer

Phone: 605-381-3000

email address:  randy@deadwoodbiofuels.com

Equipment: Twin screw extruder

 (see picture #1, click here)

 (see picture #2, click here)

 (see layout drawing #3, click here)

 (see technical specification #4, click here)

Make: Berstorff Model ZE 180A x 28D - UT

Year: 1998

Size: 194mm

L/D: 28:1

HP: 3,000 HP

Water Cooled: Yes

Vented: Yes, Two (2) sections

Center Line Height: Standard

Price: $850,000.00

Other important information: Production of Polyketone P 1000 and R 1000, Throughput: 1750 - 7000 kg/hr, Screw Speed Max 325 1/min & 35 1/min., two (2) spare barrels, under power to test and drive Siemens 3 ph, 460 volt connected with Desch Coupler. 9/11
 

Company Name: Canadian Resin Recovery
 

Contact Name: George Lang

Phone: 613-932-2496

Fax: 613-938-3303

email address:  glang@knorplast.com

Equipment: Single screw extruder

 (see picture #1, click here)

 (see picture #2, click here)

 (see picture #3, click here)

Make: Hartig

Year: unknown

Size: 4.5"

L/D: ?

HP: 200 HP

Air Cooled: Yes

Vented: ?

Center Line Height: Standard

Price: $20,000.00 or best offer

Other important information: Electrical panel has been recently CSA approved, 480 volt, 3 phase. 12/11
 

Company Name: Andrew
 

Contact Name: Andrew

Phone: 978-345-0176

email address:  ussyncor@aol.com

Equipment: Two (2) Single screw extruder

Make: Prodex & HPM

Year: 1969-1988

Size: 4.5" & 3.5"

L/D: 24:1 & 30:1

HP: 200 & 150 HP

Air Cooled: Yes, Water Cooled: Yes

Vented: Yes both units

Center Line Height: Low Boy

Price: $16,000.00  & 78,000.00 or best offer

Other important information: Older model in good condition and in working order and has all manuals and control panel. Newer model is in god working order and was hardly used and has all manuals its cost NEW was over 130K. 12/11