Item
(001) |
|
Company Name: ROWE
Contact Name: John Donato
Phone: 954-983-7120 EX: 501
E-Mail Address: jdonato@dbindustrialgroup.com
Equipment: Cold Feed Rubber Extruder
Size: 2 1/2" to 3 1/2"
L/D: 12 to 1 Vented: No Water Cooled: Yes
Standard Centerline height: Yes
Price range: up to $7,500.00
Looking for: We want a Davis-Standard or Royal extruder that MUST have a roll feeder in the feed section. 7/10
|
Item
(002) |
|
Company Name: Attitude Life Science Products LTD
Contact Name: Rajesh Agarwal
Phone: 011 91 9822022815
E-Mail Address: rajesh@attitudeproduct.com
Equipment: Twin Screw co-rotating compounding line for 500 kgs/hr
Size: 90mm
HP: 150 L/D: 40 to 1 Vented: Yes Water
or Air Cooled: Yes
Standard Centerline height: Yes
Price range: up to $70,000.00
Looking for: We want the line to run talc filled up to 60% and glass filled up to 40%. 9/10
|
Item
(003) |
|
Company Name: Pheonix Plastics
Contact Name: Anthony Mano
Phone: 905-673-0101 Mobile: 416-819-8283 Fax: 905-673-0102
E-Mail Address: amano@phoenix-plastics.ca
Equipment: Single Screw Extruder
Size: 6" L/D: 30-38 to 1
Vented: yes
H.P.: 300+ Air Cooled or water: Yes
Standard Centerline height: Yes
Price range: up to $45,000.00
Looking for: Recycling line that can process LL & LDPE and PP 1/11
|
Item
(004) |
|
Company Name: Primary Packaging
Contact Name: Andy Mark
Phone: 330-874-3131 EX: 19
E-Mail Address: amark@ppibags.com
Equipment: Gloucester (GEC) Single Screw Extruder
Size: 3 1/2" L/D: 24 or 30 to 1
Vented: no
H.P.: 100+ Air Cooled: Yes
Low boy: Yes
Price range: based on condition
Looking for: Extruder ONLY, drive and control NOT required. 2/11
|
Item
(005) |
|
Company Name: Creative Profiles Inc.
Contact Name: Ben
Phone: 905-789-7773
E-Mail Address: benson24@sympatico.ca
Equipment: Single Screw Extruder(s)
Size: 3" and 3 1/2"
Vented: no Air Cooled: Yes
Standard Center Line: Yes
Price range: 0 to $10,000.00
Looking for: A good used 3 and 3.5 inch single screw extruders. I am located in Brampton Canada. 2/11
|
Item
(006) |
|
Company Name: Babu & Co.
Contact Name: Sai Babu
Phone: 011 91 9913325989
E-Mail Address: babu_1257@hotmail.com
Equipment: Coperion (W & P) ZSK-92 Twin Screw Extruder
Size: 92mm
Vented: Yes Water Cooled: Yes
High Boy: Yes
Price range: Open, based on condition
Looking for: 3/11
|
Item
(007) |
|
Company Name: Sean Plastics
Contact Name: Sean Pritchard
Phone: 011 27 76 632 4613
E-Mail Address: sean-pritchard@hotmail.com
Equipment: Foam Profile Single Screw Extruder
Size: 65mm (2 1/2") KW: 55 (75HP)
Vented: NO
Air Cooled: Yes
High Boy: Yes
Price range: $10,000.00 to 20,000.00, based on condition
Looking for: To run PE foam at a rate of 30 to 50 kg/hr (66 to 110 lbs/hr) 3/11
|
Item
(008) |
|
Company Name: Tamales/Mother Earth's
Contact Name: Staci
Phone: 916-387-6324
E-Mail Address: emmastamales@sbcglobal.net
Equipment: Co-Ex FOOD Extruder
Size: 65mm (2.559")
Price range: $100.00 to 15,000.00, based on condition
Looking for: 3 phase or 110 volt 6/11
|
Item
(009) |
|
Company Name: Rio Packaging
Contact Name: Felix Lerma
Phone: 956-640-5905
E-Mail Address: riopack.felix@gmail.com
Equipment: Extruder
Size: 1 to 2" Water Cooled: Yes
Price range: $0 to 15,000.00, based on condition
Looking for: Small extruder to make 3/4 tube only. 10/11
|
Item
(010) |
|
Company Name: Egitalia Imp & Exp
Contact Name: Abdel Fatah El Ekhtiar
Phone: 011 20128 068 7770
Fax: 011 20224 021 832
E-Mail Address: egitalia746@yahoo.com
Equipment: Blown Film Line
Size: 14,000mm
Price range: $0 to 150,000.00, based on condition
Looking for: Need a blown film line, mono or multi layer for agriculture film. Equipment will be installed in Egypt. 10/11
|
